C-100500-KIT Flushmate Cartridge Kit
Processing...

C-100500-KIT Flushmate Cartridge Kit

Customer Rating 5.00/5.00 out of 3 reviews

Code: C-100500-KIT
$33.30 HOT
Quantity Price
1 $33.30
2-4 $29.97
5-9 $29.30
10+ $28.30
Qty

Product Description

•••••

Flushmate C-100500-KIT Replacement Cartridge for Flushmate 1.6 GPF Models

The Flushmate C-100500-KIT 1.6 GPF and 1.0 GPF Cartridge, is designed to replace existing Flushmate cartridges for 1.6GPF and 1.0 GPF Flushmate models including Series 501A, 501B, 503, and 504.

The Flushmate C-100500-KIT is specially designed to replace your existing Flushmate C-100500 Cartrdges for both 1.6GPF and 1.0 GPF Flushmate Series system.

The Flushmate Flush Valve Cartridge is located on top the Flushmate system in the center of the vessel. This is the main valve that opens and closes to deliver the water to the toilet bowl.

C-100500-Kit Flushmate Cartridge Parts Included:

The Flushmate C-100500-KIT 1.6 GPF Cartridge, includes

(1) C-100500 Flushmate 1.6 GPF Cartridge Assembly

(1) Flushmate Upper Supply DuckBill Replacement

(1) Flushmate Lower Supply Filter Screen

(1) Installation Instructions

C-100500-KIT Flushmate Models:

To verify your Flushmate replacement, the serial number label located on the top of your existing Flushmate unit should contain the following information.

Model No. GPF Series
M-101526 1.6 501A
M-102540 1.6 501A
M-101526-F 1.6 501B
M-102540-F 1.6 501B
M-101526-F3 1.6 503
M-102540-F3 1.6 503
M-101526-F4 1.0 504
M-102540-F4 1.0 504

Other Flushmate Models:

Flushmate 1.28 GPF Systems cartridges use the C-100501-KIT. To order your replacement Flushmate Cartridge for your 1.28 GPF Flushmate System, click here.

Flushmate Model No M-102540-C 1.0 GPF Systems cartridges use the C-100502-KIT. To order your replacement Flushmate Cartridge for your M-102540-C Flushmate System, click here.

Flushmate 200 and 500 Series System cartridges are no longer available.

How to Install

Add installation instructions or video or PDF here

Manufacturer Information

Eflushmate.com only sells Flushmate factory replacement products produced by Flushmate.

The Flushmate C-100500-KIT Cartridge Assembly includes a 1 year limited warranty.

You May Also Like

•••••

Customer reviews

★★★★★ ★★★★★
5.00/5 Stars out of 3 Reviews
5 ★
3
4 ★
0
3 ★
0
2 ★
0
1 ★
0
Fix it right, fix it cheap, great product.
★ ★ ★ ★ ★ 5
Michael Jeff | April 18th, 2019
I'll admit I am a plumbing failure (most days) but replacing this was cake. I had a toilet that would like like a moose being attached by a mountain lion randomly every few hours in the middle of the night. The cartridge seal had failed. This unit also comes with the duckbill valve and not inlet screen-- neither of which I needed but kept as spares. Pro tip: Use the handles of a pair of large pliers or channel locks to unscrew the old unit (with the water off), turn the water back on and screw in the new unit until the water stops. Reinstall plunger bar, handle, whatever else you unnecessarily took off and enjoy your now fixed throne.
Dont Be A Neanderthal When Installing
★ ★ ★ ★ ★ 5
Mr. Johnson | April 18th, 2019
My flushmates have been in service since 1998 and this is the first time I have had to fix any of them. This valve was leaking from the top which caused a $50 increase in my water bill over the course of a quarter. In hindsight I should have tried to disassemble it and clean up / lubed the Orings and tried that. Anyways, I did replace it and stopped the leak but was not getting a complete flush. Replaced the duckbill vent that comes with the kit with no results. Replaced the whole inlet vent same outcome. Ended up turning the valve out 3/4 of a turn and BINGO!! Complete flush! I had cranked it in too tight. When installing it helps to lube up the Orings with some light grease so it assembles easy. The wrench for removing and installing these is not needed. Plyer handles work just as well . And remember - DO NOT OVERTIGHTEN!
Follow the instructions!!
★ ★ ★ ★ ★ 5
Judy A. Jones | April 18th, 2019
My toilet would not stop running, the button was stuck down. Even though I doubted that I needed the part I ordered it. It came with every possible item that could be wrong. I was worried as the new one screwed in a lot further down than the original one into the threads and it still kept running.... Reading the info it said to only screw as far as one black thread showing, turn on the water and then tighten in increments, I assume for the air to get out of the tank. It worked! after a few incremental turns the toilet shut off and now works perfect! So easy an old lady can do it!!