FLUSHMATE
Flushmate Complete Replacement System for 501A&501B for Pushbutton and -F3B-
Part Number: M-101526-F3B
★★★★★
4.78/5 Star out of 23 Reviews
Code: M-101526-F3B
EFlushmate Price: $176.55
$167.81
SALE
Product Description
•••••
Flushmate M-101526-F3B 1.6 gpf System for 501A, 501B, or 503 Series with Pushbutton
Shop Now! The Flushmate III M-101526-F3B Replacement System is designed to replace the Flushmate M-101526-F 501B Series or M-101526-F3 503 Series models. The Flushmate III M-101526-F3B 1.6 GPF Replacement System, is designed to replace the Flushmate M-101526-F 1.6 gpf 501A, 501B, and 503 Series models for two piece toilet fixtures.The Flushmate III M-101526-F3B includes the Flushmate M-101526-F3 complete system with locknuts and gasket to install in your toilet tank.The Flushmate III M-101526-F3B 1.6GPF Replacement system is designed to only work with existing pressure assist toilets that were originally equiped with the M-101526, M-101526-F, or M-101526-F3 1.6 GPF system. See compatable systems below.Water savings for life
The flush volume will never decrease, which means water savings are sustained for the life of the fixture.Superior drain carry
Flushmate equipped toilets use pressure (versus gravity) to produce a longer drain carry, pushing waste up to 33% further than the recommendations set by the American National Standards Institute (ANSI).Test conducted according to ANSI standard procedures as discussed in APSE Research Report 91-01.
Fewer double flushes
70 gallon per minute peak flow of Flushmate pressure-assisted technology clears the bowl on the first flush.5-year warranty
Our commitment to excellence gives you the confidence and support for years to come.Flushmate M-101526-F3B Replacement system Included:
- (1) M-101526-F3 Flushmate III 1.6 GPF Replacement System
- (1) Flushmate Tank to Toilet Tank Gasket (Gasket between Flushmate System and toilet tank)
- (1) Flushmate Tank to Toilet Tank Locknut (Locknut to mount Flushmate System into the toilet tank)
- (1) Flushmate Tank to Bowl Gasket (Gasket between toilet tank and toilet bowl)
- (1) Flushmate Lower Supply Locknut (Locknut to mount Flushmate System into the toilet tank)
Toilet Types
Two Piece ToiletA two piece toilet is made of two separate pieces of vitreous china, a holding tank and a bowl. The holding tank is mounted on the bowl by the installer using washers, nuts and bolts. Two piece toilets are often called "close-coupled" in reference to this mounting system and are the most common toilets on the market. The Flushmate model number for this type of toilet always begins with M-101526.
M-101526-F3B Flushmate Models:
To verify the M-101526-F3B is the correct replacement system for your Flushmate system, please verify your serial number, label located on the top of your existing Flushmate unit, contains the following information.Model No. | Serial No. | Series | GPF |
---|---|---|---|
M-101526 | XXXXXX-A01-XXXX | 501A | 1.6 GPF |
M-101526-F | XXXXXX-F01-XXXX | 501B | 1.6 GPF |
M-101526-F | XXXXXX-F0A-XXXX | 501B | 1.6 GPF |
M-101526-F3 | XXXXXX-F3B-XXXX | 503 | 1.6 GPF |
Customer reviews
★★★★★
4.78/5 Stars out of 23 Reviews
0
0
1
3
19
Dan Johnson (Iowa) | November 12th, 2020
I've owned a Flushmate since 1993. The old tank finally went bad. Called Sloan & replacement sent out. I'm a big fan of pressure assisted toilets, especially since we're dealing with low water consumption.......and a big fan of Sloan. I would never be without a Flushmate tank system. Never felt you could go wrong with this product.
Tim Warden (AZ) | September 18th, 2020
My old 501A from 1996 was on its last legs and Bobby in Tech Support told me that alas it was time to replace the unit. He walked me through the details, gave me the part numbers, answered all my questions about compatibility. He was very knowledgeable, friendly and patient with my questions.
I received the replacement unit yesterday and this morning set about installing it. The instructions were all perfectly clear and everything was going well until I hit a snag on the tank-to-bowl gasket. The new gasket appeared too large and incompatible with the old. So I called Tech Support again and spoke with Martin, who reassured me it was normal — a universal gasket that compresses — and walked me through how to reattach the tank. Ten minutes later the job was completed with no "New System Adjustments" required.
Their Tech Support department is top notch. Five stars.
Warren Reeves (Virginia) | September 14th, 2020
The installation would have gone faster if the printed instructions were more specific. The bolts we removed from the porcelain tank were both the same. The new bolts were different, one thinner & smaller, the other thicker & larger. Which one was inside & which one outside? No help from the instructions. The old tank did not use gaskets, the new one had them: one inside & one outside? No mention in the instructions. It all came down to how much space was left to mount the bowl.
I was also told that a wrench would be included with my order. It was not. The wrench would have made things goes faster. It took about an hours and forty five minutes to get the unit back together & adjusted.
Winnie T Coyle (GA) | May 12th, 2020
Very pleased with the service and communication with sales staff. Installed new vessel on 5/10 and all seems to be working properly. I would highly recommend doing business with them.
HENRY SKINNER (CA) | May 3rd, 2020
great product and very straight forward easy to install
Charles Cayford (Maine) | April 4th, 2020
On 3-28-20 I called your company and spoke with Martin.He was VERY helpful in answering all my questions about your product and he was just very helpful in the whole transaction. When he called me back after calling for more answers,that's when i decided to purchase your product,the Flushmate bladder and everything else came in 2 days after ordering and was very pleased in how fast you got it all together and got it to me right away.Martin was right when telling me that it would be a simple job and it was....Thank You,now i have a new toilet without any concerns. THANK YOU
Tim Klein (IL) | March 16th, 2020
Replaced my original Flush mate Tank purchased in 1993; this replacement was a perfect fit; easy installation; and works like a charm; Everyone should replace their old slow traditional and inefficient flush system with a Flush Mate system; best system on the market !!1
Joe G (CT) | March 8th, 2020
Instructions were very clear to understand the step by step installation process. Did not order the special wrench, big mistake fortunately I have a Lowes close by and had to purchase an adjustable wrench for the 3" nut. Great product and quick delivery.
Remodelman (Colorado) | February 23rd, 2020
This Flushmate replacement was as straightforward as dealing with the team at Flushmate.
If you can install a toilet, you can replace a Flushmate pressure tank. The product itself appears to be very well constucted. The instructions aren't your typical written-by-an-engineer over-technical hogwash. They are easy to follow, and include informative illustrations.
I hope that I won't need to, but if I do, I would order this product again in a second.
Samuel Rowe (Massachusetts) | December 6th, 2019
My first 3 were purchased and installed in 1993. Over the years the original steel canister Flushmates have been replaced by new models. One of the new models was involved in a recall and Flushmate contacted me and supplied a replacement unit and had it installed at no cost to me. I will happily continue to use Flushmate.