Flushmate Complete Replacement System 1.0 gpf - For Vortens/Lamosa 3468 Tank
Part Number: M-101526-F41Not Yet Rated!
Flushmate M-101526-F41 Replacement System for the Lamosa, Vortens, Copperfit - Winfield, Contrac CHANE, and Contrac Cleo 1.0 gpf pressure assist toilets.Shop Now! The Flushmate IV 504 Series M-101526-F41 Replacement System is designed to replace the Flushmate M-101526-F4 504 Series for the Lamosa, Vortens, Copperfit - Winfield, Contrac CHANE, and Contrac Cleo pressure assist toilets. The Flushmate IV M-101526-F41 1.0 GPF Replacement System, is designed to replace the Flushmate M-101526-F4 1.0 gpf 504 Series models for two piece toilet fixtures. The Flushmate IV M-101526-F41 includes the Flushmate M-101526-F4 complete system with locknuts and gasket to install in your toilet tank. The Flushmate IV M-101526-F41 1.0 gpf replacement system is designed to only work with existing pressure assist toilets that were originally equiped with the M-101526-F4 for the Lamosa, Vortens, Copperfit - Winfield, Contrac CHANE, and Contrac Cleo 1.0 gpf pressure assist toilets. See compatible systems below.
Water savings for lifeThe flush volume will never decrease, which means water savings are sustained for the life of the fixture.
Superior drain carryFlushmate equipped toilets use pressure (versus gravity) to produce a longer drain carry, pushing waste up to 33% further than the recommendations set by the American National Standards Institute (ANSI).
Test conducted according to ANSI standard procedures as discussed in APSE Research Report 91-01.
Fewer double flushes70 gallon per minute peak flow of Flushmate pressure-assisted technology clears the bowl on the first flush.
5-year warrantyOur commitment to excellence gives you the confidence and support for years to come.
Flushmate M-101526-F41 Replacement system Included:
- (1) M-101526-F4 Flushmate III 1.0 GPF Replacement System
- (1) Flushmate Tank to Toilet Tank Gasket (Gasket between Flushmate System and toilet tank)
- (1) Flushmate Tank to Toilet Tank Locknut (Locknut to mount Flushmate System into the toilet tank)
- (1) Flushmate Tank to Bowl Gasket (Gasket between toilet tank and toilet bowl)
- (1) Flushmate Lower Supply Locknut (Locknut to mount Flushmate System into the toilet tank)
Toilet TypesTwo Piece Toilet
A two piece toilet is made of two separate pieces of vitreous china, a holding tank and a bowl. The holding tank is mounted on the bowl by the installer using washers, nuts and bolts. Two piece toilets are often called "close-coupled" in reference to this mounting system and are the most common toilets on the market. The Flushmate model number for this type of toilet always begins with M-101526.
M-101526-F41 Flushmate Models:To verify the M-101526-F41 is the correct replacement system for your Flushmate system, please verify your serial number, label located on the top of your existing Flushmate unit, contains the following information.
|Model No.||Serial Number||Series|
Flushmate Warranty Policy