Flushmate Complete Replacement System 1.0 gpf 504 Series
Part Number: M-101526-F42
5/5 Star out of 8 Reviews
EFlushmate Price: $158.58 SALE
Flushmate M-101526-F42 Replacement System for the M-101526-F4Shop Now! The Flushmate IV 504 Series M-101526-F42 Replacement System is designed to replace existing Flushmate M-101526-F4 1.0 GPF 504 Series for the Sloan, Kohler K4484, Mansfield 153, St.Thomas / Vitromex, Peerless 1, VitrA 5066 and Western T4ULF-PF-1 pressure assist toilets. The Flushmate IV M-101526-F42 1.0 GPF Replacement System, is designed to replace the Flushmate M-101526-F4 1.0 gpf 504 Series models for two piece toilet fixtures. The Flushmate IV M-101526-F42 includes the Flushmate M-101526-F4 complete system with locknuts and gasket to install in your toilet tank. The Flushmate IV M-101526-F42 1.0 gpf replacement system is designed to only work with existing pressure assist toilets that were originally equiped with the M-101526-F4. See compatible systems below.
Water savings for lifeThe flush volume will never decrease, which means water savings are sustained for the life of the fixture.
Superior drain carryFlushmate equipped toilets use pressure (versus gravity) to produce a longer drain carry, pushing waste up to 33% further than the recommendations set by the American National Standards Institute (ANSI).
Test conducted according to ANSI standard procedures as discussed in APSE Research Report 91-01.
Fewer double flushes70 gallon per minute peak flow of Flushmate pressure-assisted technology clears the bowl on the first flush.
5-year warrantyOur commitment to excellence gives you the confidence and support for years to come.
Flushmate M-101526-F42 Replacement system Included:
- (1) M-101526-F4 Flushmate III 1.0 GPF Replacement System
- (1) Flushmate Tank to Toilet Tank Gasket (Gasket between Flushmate System and toilet tank)
- (1) Flushmate Tank to Toilet Tank Locknut (Locknut to mount Flushmate System into the toilet tank)
- (1) Flushmate Tank to Bowl Gasket (Gasket between toilet tank and toilet bowl)
- (1) Flushmate Lower Supply Locknut (Locknut to mount Flushmate System into the toilet tank)
Toilet TypesTwo Piece Toilet
A two piece toilet is made of two separate pieces of vitreous china, a holding tank and a bowl. The holding tank is mounted on the bowl by the installer using washers, nuts and bolts. Two piece toilets are often called "close-coupled" in reference to this mounting system and are the most common toilets on the market. The Flushmate model number for this type of toilet always begins with M-101526.
M-101526-F41 Flushmate Models:To verify the M-101526-F42 is the correct replacement system for your Flushmate system, please verify your serial number, label located on the top of your existing Flushmate unit, contains the following information.
|Model No.||Serial Number||Series|
Flushmate Warranty Policy
5/5 Stars out of 8 Reviews
CHRISTOPHER G. SMITH (TX) | July 3rd, 2021
When we bought our 1953 home over 20 years ago, there was a Flushmate in one of the bathrooms. We liked it, so a few years later, we replaced the toilet in the second bathroom with a newer Flushmate. Over time, I've replaced a few cartridges and both tanks. This company provides excellent customer service. A knowledgeable person helps on the phone to ensure you get the correct parts. The parts work and last for years. The company website provides great documentation and instructions. In my opinion, this company has it all together.
Pete C (NY) | June 23rd, 2021
20+ year old unit finally gave out, and I didn't want to replace the whole toilet. Website was easy to use and serial number chart made sure I had the correct unit. Arrived super fast and came out of the box ready to go. The entire project took 20 minutes, and the whole system is better than new!
Janet Panzarella (California) | April 26th, 2021
Awesome! Arrived in 3 days. Very easy to install. My original tank leaked so I opted to replace instead of buying a whole new toilet. So glad I did! Quick. Easy. And I did it all myself!
Joyce buchholz (Va) | April 23rd, 2021
The Flushmate is the best for an old house, 1921, with cast iron pipe. Low flow toilets were always clogging. No plunger in the bathroom now. The shipping was quick
terrence ward (IL) | October 18th, 2020
My original unit was about twenty years old and the cartridge was leaking so I opted to remove and replace the unit. Great website, easy checkout, the unit arrived in two days. The packaging was awesome, no worries about any shipping damage because of the rigid box. Unit installed easily and needed no adjustment.. I am ready for twenty more years of powerful flushes with this new unit.
Hector Perez (FL) | August 26th, 2020
I have been using these for years and they work great. I use them in the office and it really helps to reduce our water bill since the employees only have to flush once with the pressure this creates.
Gregory Lewis (TX) | August 15th, 2019
We have highly recommended this to our friends and family......and at least 3 to 4 folks upgraded the toilets based on our recommendations
Philip Nanette (OH) | August 9th, 2019
I needed to replace the Flushmate and ordered the replacement unit. The plumber wanted $400 to install it so thought I would try to do it myself. It was my first time changing anything in a toilet and it was far easier than I thought. I brought the tool kit (ST300500) which had all the toolds to install the system. $13 for the tools and an hour to install compared to $400 by a plumber. No question I made the right choice! It was easy.