Flushmate Complete Replacement System for M-101526-F3 1.6 gpf Replacement System
Part Number: M-101526-F31
4.94/5 Star out of 69 Reviews
Flushmate M-101526-F31 Replacement System
Shop Now! The Flushmate III M-101526-F31 Replacement System is designed to replace the Flushmate M-101526-F3 503 Series models. The Flushmate III M-101526-F31 1.6 GPF Replacement System, is designed to replace the Flushmate M-101526-F3 1.6GPF 503 Series models for two piece toilet fixtures.The Flushmate III M-101526-F31 includes the Flushmate M-101526-F3 complete system with locknuts and gasket to install in your toilet tank.The Flushmate III M-101526-F31 1.6GPF Replacement system is designed to only work with existing pressure assist toilets that were originally equiped with the Flushmate III M-101526-F3 1.6 GPF system.
For M-101526-F3 1.6 GPF 503 Models
Water savings for lifeThe flush volume will never decrease, which means water savings are sustained for the life of the fixture.
Superior drain carryFlushmate equipped toilets use pressure (versus gravity) to produce a longer drain carry, pushing waste up to 33% further than the recommendations set by the American National Standards Institute (ANSI).
Test conducted according to ANSI standard procedures as discussed in APSE Research Report 91-01.
Fewer double flushes70 gallon per minute peak flow of Flushmate pressure-assisted technology clears the bowl on the first flush.
5-year warrantyOur commitment to excellence gives you the confidence and support for years to come.
Flushmate M-101526-F31 Replacement system Included:
- (1) M-101526-F3 Flushmate III 1.6 GPF Replacement System
- (1) Flushmate Tank to Toilet Tank Gasket (Gasket between Flushmate System and toilet tank)
- (1) Flushmate Tank to Toilet Tank Locknut (Locknut to mount Flushmate System into the toilet tank)
- (1) Flushmate Tank to Bowl Gasket (Gasket between toilet tank and toilet bowl)
- (1) Flushmate Lower Supply Locknut (Locknut to mount Flushmate System into the toilet tank)
Toilet TypesTwo Piece Toilet
A two piece toilet is made of two separate pieces of vitreous china, a holding tank and a bowl. The holding tank is mounted on the bowl by the installer using washers, nuts and bolts. Two piece toilets are often called "close-coupled" in reference to this mounting system and are the most common toilets on the market. The Flushmate model number for this type of toilet always begins with M-101526.
M-101526-F31 Flushmate Models:To verify the M-101526-F31 is the correct replacement system for your Flushmate system, please verify your serial number, label located on the top of your existing Flushmate unit, contains the following information.
|Model No.||Serial No.||Series||GPF|
Flushmate Warranty Policy
4.94/5 Stars out of 69 Reviews
Joel Pruitt (TN) | July 20th, 2021
This was a replacement for an older Sloan Flushmate that was in the house when we bought it 12 years ago. Easy plug and play into all the mountings. The best part about this order was the fast shipping. I also saved money over the listing on Amazon. I will definitely order directly again the next time.
Yvonne U (New Jersey) | June 29th, 2021
Very satisfied with the promptness of the deliver and the product was exactly what I needed
Richard Blachly (KS) | June 25th, 2021
Purchased the entire replacement kit along with the tool kit that others recommended. Highly recommend buying the tool kit. It went so much faster. Installation was quick and easy. Took less than an hour start to finish.
bruce quan (ca) | June 15th, 2021
The tank arrived and I read the manual and looked at a couple of YouTube's. I had a hiccup on my first attempt to replace the unit. I couldn't get the big nylon nut off the bottom of the tank with my tools. You should either have a BIG set of channel locks or their tool set. I opted to buy their tool set and the install went in with no trouble. Just wish they would have mentioned the tool set when I was ordering the tank, it would have saved me a week.
Gayle P Barnett (al) | June 14th, 2021
Replaced a unit that was quite old. It was fairly easy to install and seems to work fine. Might need to replace the handle, the old one has quite a bit too much play, takes an effort to engage it.