Flushmate Complete Replacement System for M-101526-F3 1.6 gpf Replacement System
Part Number: M-101526-F31
4.94/5 Star out of 69 Reviews
Flushmate M-101526-F31 Replacement System
Shop Now! The Flushmate III M-101526-F31 Replacement System is designed to replace the Flushmate M-101526-F3 503 Series models. The Flushmate III M-101526-F31 1.6 GPF Replacement System, is designed to replace the Flushmate M-101526-F3 1.6GPF 503 Series models for two piece toilet fixtures.The Flushmate III M-101526-F31 includes the Flushmate M-101526-F3 complete system with locknuts and gasket to install in your toilet tank.The Flushmate III M-101526-F31 1.6GPF Replacement system is designed to only work with existing pressure assist toilets that were originally equiped with the Flushmate III M-101526-F3 1.6 GPF system.
For M-101526-F3 1.6 GPF 503 Models
Water savings for lifeThe flush volume will never decrease, which means water savings are sustained for the life of the fixture.
Superior drain carryFlushmate equipped toilets use pressure (versus gravity) to produce a longer drain carry, pushing waste up to 33% further than the recommendations set by the American National Standards Institute (ANSI).
Test conducted according to ANSI standard procedures as discussed in APSE Research Report 91-01.
Fewer double flushes70 gallon per minute peak flow of Flushmate pressure-assisted technology clears the bowl on the first flush.
5-year warrantyOur commitment to excellence gives you the confidence and support for years to come.
Flushmate M-101526-F31 Replacement system Included:
- (1) M-101526-F3 Flushmate III 1.6 GPF Replacement System
- (1) Flushmate Tank to Toilet Tank Gasket (Gasket between Flushmate System and toilet tank)
- (1) Flushmate Tank to Toilet Tank Locknut (Locknut to mount Flushmate System into the toilet tank)
- (1) Flushmate Tank to Bowl Gasket (Gasket between toilet tank and toilet bowl)
- (1) Flushmate Lower Supply Locknut (Locknut to mount Flushmate System into the toilet tank)
Toilet TypesTwo Piece Toilet
A two piece toilet is made of two separate pieces of vitreous china, a holding tank and a bowl. The holding tank is mounted on the bowl by the installer using washers, nuts and bolts. Two piece toilets are often called "close-coupled" in reference to this mounting system and are the most common toilets on the market. The Flushmate model number for this type of toilet always begins with M-101526.
M-101526-F31 Flushmate Models:To verify the M-101526-F31 is the correct replacement system for your Flushmate system, please verify your serial number, label located on the top of your existing Flushmate unit, contains the following information.
|Model No.||Serial No.||Series||GPF|
Flushmate Warranty Policy
Currently Viewing Reviews with a rating of 4. Click here to reset.
4.94/5 Stars out of 69 Reviews
GB (NJ) | July 25th, 2021
Having the tool kit made the installation easier. I do recommend purchasing it. The only problem I had had nothing to do with the product. I wish I got notification that the product was shipped. After a couple of days I had to call eflushmate to find out the status of the shipping. That is why there are only 4 stars instead of 5, because of the lack of notification. After speaking with the customer rep, they sent me the tracking number.
Rick (CA) | March 17th, 2021
The product came quickly, which was great. However, it arrived with the air intake valve broken. I didn't have time to mess with a return, so I took the air return from the old tank and installed it on the new tank. It wasn't very easy, because the hose is installed very well with special clips. The install of the unit was easy, and the kit came with everything needed. I was having some issues with the unit not flushing on the first flush, and sometimes took up to three times to properly flush. I ordered some duckbill air intake replacements, and that seemed to do the trick.
Jim Ford (Texas) | September 3rd, 2020
Perfect fit. Small leak around the threads on center cilinder. Hoping it'll stop on its own but may have to try to tighten it.
Dave (MO) | July 15th, 2020
This replaced an older 503 that had sprung a pinhole leak in the pressure vessel. It works as expected, but I can only give it four stars because it came with zero instructions or paperwork. I was having a hard time getting the new tank to fit right and it turns out there should have also been a supplemental piece of paper in there telling me that it's a known problem and how to fix it.