Flushmate Complete Replacement System 1.6 gpf for Kohler K4404
Part Number: M-101526-F32
5/5 Star out of 2 Reviews
Flushmate M-101526-F32 Replacement System for Kohler K4404
Shop Now! The Flushmate III M-101526-F32 Replacement System is designed to replace the Flushmate M-101526-F3 503 Series models for Kohler K4404 toilets. The Flushmate III M-101526-F32 1.6 GPF Replacement System, is designed to replace the Flushmate M-101526-F3 1.6 gpf 503 Series models for two piece Kohler K4404 toilet fixtures.The Flushmate III M-101526-F32 includes the Flushmate M-101526-F3 complete system with locknuts and gasket to install in your toilet tank.The Flushmate III M-101526-F32 1.6GPF Replacement system is designed to only work with existing Kohler K4404 pressure assist toilets that were originally equiped with the Flushmate III M-101526-F3 1.6 GPF system.
For M-101526-F32 Flushmate Complete Replacement System 1.6 GPF 503 Models
Water savings for lifeThe flush volume will never decrease, which means water savings are sustained for the life of the fixture.
Superior drain carryFlushmate equipped toilets use pressure (versus gravity) to produce a longer drain carry, pushing waste up to 33% further than the recommendations set by the American National Standards Institute (ANSI).
Test conducted according to ANSI standard procedures as discussed in APSE Research Report 91-01.
Fewer double flushes70 gallon per minute peak flow of Flushmate pressure-assisted technology clears the bowl on the first flush.
5-year warrantyOur commitment to excellence gives you the confidence and support for years to come.
Flushmate M-101526-F32 Replacement system Included:
- (1) M-101526-F3 Flushmate III 1.6 GPF Replacement System
- (1) Flushmate Tank to Toilet Tank Gasket (Gasket between Flushmate System and toilet tank)
- (1) Flushmate Tank to Toilet Tank Locknut (Locknut to mount Flushmate System into the toilet tank)
- (1) Flushmate Tank to Bowl Gasket (Gasket between toilet tank and toilet bowl)
- (1) Flushmate Lower Supply Locknut (Locknut to mount Flushmate System into the toilet tank)
Toilet TypesTwo Piece Toilet
A two piece toilet is made of two separate pieces of vitreous china, a holding tank and a bowl. The holding tank is mounted on the bowl by the installer using washers, nuts and bolts. Two piece toilets are often called "close-coupled" in reference to this mounting system and are the most common toilets on the market. The Flushmate model number for this type of toilet always begins with M-101526.
M-101526-F32 Flushmate Models:To verify the M-101526-F32 is the correct replacement system for your Flushmate system, please verify your serial number, label located on the top of your existing Flushmate unit, contains the following information.
|Model No.||Serial No.||Series||GPF|
Flushmate Warranty Policy
Currently Viewing Reviews with a rating of 5. Click here to reset.
5/5 Stars out of 2 Reviews
Freeman L Beachy (OH) | September 24th, 2022
Excellent service! Ronna called me to make sure I had ordered the correct one. I hadn’t and she gave me the correct number. Thank you very much!
Donald (GEORGIA) | September 22nd, 2019
Bought this to replace a very old Flushmate product that was beginning to fail. This worked perfectly and we are happy with out purchase. Very fast shipping.
Note From Store Owner: Thank you for your purchase. If we can assist you with anything else, please let us know.