Flushmate Complete Replacement System 1.0 gpf - For Kohler K4484 Tank
5/5 Star out of 5 Reviews
Flushmate M-101526-F43 Replacement System for the M-101526-F4 Flushmate 1.0 gpf - For Kohler K4484 TankShop Now! The Flushmate IV 504 Series M-101526-F43 Replacement System is designed to replace existing Flushmate M-101526-F4 1.0 GPF 504 Series for Kohler K4484. The Flushmate IV M-101526-F43 1.0 GPF Replacement System, is designed to replace the Flushmate M-101526-F4 1.0 gpf 504 Series models for two piece toilet fixtures. The Flushmate IV M-101526-F43 includes the Flushmate M-101526-F4 complete system with locknuts and gasket to install in your toilet tank. The Flushmate IV M-101526-F42 1.0 gpf replacement system is designed to only work with existing pressure assist toilets that were originally equiped with the M-101526-F4. See compatible systems below.
Water savings for lifeThe flush volume will never decrease, which means water savings are sustained for the life of the fixture.
Superior drain carryFlushmate equipped toilets use pressure (versus gravity) to produce a longer drain carry, pushing waste up to 33% further than the recommendations set by the American National Standards Institute (ANSI).
Test conducted according to ANSI standard procedures as discussed in APSE Research Report 91-01.
Fewer double flushes70 gallon per minute peak flow of Flushmate pressure-assisted technology clears the bowl on the first flush.
5-year warrantyOur commitment to excellence gives you the confidence and support for years to come.
Flushmate M-101526-F43 Replacement system Included:
- (1) M-101526-F4 Flushmate III 1.0 GPF Replacement System
- (1) Flushmate Tank to Toilet Tank Gasket (Gasket between Flushmate System and toilet tank)
- (1) Flushmate Tank to Toilet Tank Locknut (Locknut to mount Flushmate System into the toilet tank)
- (1) Flushmate Tank to Bowl Gasket (Gasket between toilet tank and toilet bowl)
- (1) Flushmate Lower Supply Locknut (Locknut to mount Flushmate System into the toilet tank)
Toilet TypesTwo Piece Toilet
A two piece toilet is made of two separate pieces of vitreous china, a holding tank and a bowl. The holding tank is mounted on the bowl by the installer using washers, nuts and bolts. Two piece toilets are often called "close-coupled" in reference to this mounting system and are the most common toilets on the market. The Flushmate model number for this type of toilet always begins with M-101526.
M-101526-F43 Flushmate Models:To verify the M-101526-F43 is the correct replacement system for your Flushmate system, please verify your serial number, label located on the top of your existing Flushmate unit, contains the following information.
|Model No.||Serial Number||Series|
5/5 Stars out of 5 Reviews
Mike (California) | July 7th, 2021
Was the first time we had to do anything with the original since 2003 I found it simple to just replace the complete system
Robert Bertolino (Colorado) | May 27th, 2020
This is a very good product which our custodian was able to install with ease.
Dennis Ferguson (Texas) | May 26th, 2020
I continue to have leak problems with the Flushmate. Water runs continously.. Water pressure is adequate. The Flushmate I have on order is the third one. Plus the one that came in the Kohler toilet. Plus an extra Flush valve cartridge, plus an Upper Supply Group.
Note From Store Owner: We are sorry to hear about your experience with the Flushmate Product. We are here to help. Please contact our customer service department at 800-533-3460.
James M Randel (FL) | May 15th, 2020
After 15+ years the original sprang a leak....great website with excellent information and support. Replacement arrived promptly and I am back in business!
Winslow (California) | February 14th, 2020
Installed in 2006 as a component of the Kohler K4484/K4304 2-piece toilet. Parts are still available (good product support), although I haven't needed any since the Flushmate has performed flawlessly over the 13+ years we have used it on a daily basis. The only drawback to the Flushmate system is that it is noisier than gravity-flush systems when initially flushing. Refill is very quick (~15-20 seconds) and quiet.