Flushmate Complete Replacement System 1.6 gpf - For Gerber 28-385 tank (10" Rough-In)
Part Number: M-101526-F33
5/5 Star out of 3 Reviews
Flushmate M-101526-F33 1.6 gpf System for Gerber 28-385 tank (10" Rough-In Fixture)Shop Now! The Flushmate III M-101526-F33 Replacement System is designed to replace the Flushmate M-101526-F3 503 Series models for Gerber 28-385 10" rough-in toilets. The Flushmate III M-101526-F33 1.6 GPF Replacement System, is designed to replace the Flushmate M-101526-F3 1.6 gpf 503 Series models for two piece 10" rough-in Gerber 28-385 toilet fixtures.The Flushmate III M-101526-F33 includes the Flushmate M-101526-F3 complete system with locknuts and gasket to install in your toilet tank.The Flushmate III M-101526-F33 1.6GPF Replacement system is designed to only work with existing Gerber 28-385 pressure assist toilets that were originally equiped with the Flushmate III M-101526-F3 1.6 GPF system.
Water savings for lifeThe flush volume will never decrease, which means water savings are sustained for the life of the fixture.
Superior drain carryFlushmate equipped toilets use pressure (versus gravity) to produce a longer drain carry, pushing waste up to 33% further than the recommendations set by the American National Standards Institute (ANSI).
Test conducted according to ANSI standard procedures as discussed in APSE Research Report 91-01.
Fewer double flushes70 gallon per minute peak flow of Flushmate pressure-assisted technology clears the bowl on the first flush.
5-year warrantyOur commitment to excellence gives you the confidence and support for years to come.
Flushmate M-101526-F33 Replacement system Included:
- (1) M-101526-F3 Flushmate III 1.6 GPF Replacement System
- (1) Flushmate Tank to Toilet Tank Gasket (Gasket between Flushmate System and toilet tank)
- (1) Flushmate Tank to Toilet Tank Locknut (Locknut to mount Flushmate System into the toilet tank)
- (1) Flushmate Tank to Bowl Gasket (Gasket between toilet tank and toilet bowl)
- (1) Flushmate Lower Supply Locknut (Locknut to mount Flushmate System into the toilet tank)
Toilet TypesTwo Piece Toilet
A two piece toilet is made of two separate pieces of vitreous china, a holding tank and a bowl. The holding tank is mounted on the bowl by the installer using washers, nuts and bolts. Two piece toilets are often called "close-coupled" in reference to this mounting system and are the most common toilets on the market. The Flushmate model number for this type of toilet always begins with M-101526.
M-101526-F33 Flushmate Models:To verify the M-101526-F33 is the correct replacement system for your Flushmate system, please verify your serial number, label located on the top of your existing Flushmate unit, contains the following information.
|Model No.||Serial No.||Series||GPF|
Flushmate Warranty Policy
5/5 Stars out of 3 Reviews
MARSHALL R LIVELY (West Virginia) | March 22nd, 2021
Very fast shipping, And very Knowledable people, Thank You ,
KOZZ (MICHIGAN) | June 24th, 2020
Complete system + tool kit made replacement less challenging , my Gerber 1.6 works like new again
William M Kostopolus (Missouri) | July 26th, 2019
When Flushmate said it was a complete system they meant it. Which was very good because the existing seals were very corroded and the new seals were needed. Very much appreciated.