Flushmate Wrench
Processing...

Flushmate Wrench

ST100100

Ratings Snapshot
4.9
out of 5
5 (9)
4 (1)
3 (0)
2 (0)
1 (0)
Would recommend this product.
0%
Code: ST100100

$4.95 $4.45 SALE

Qty


Product Description

•••••

Flushmate ST100101 Wrench

The Flushmate ST100101 Wrench, is a 3 in 1 tools to service your Flushmate system. The Flushmate wrench can be used to remove or adjust the Flushmate cartridge assembly and remove the Discharge Extension locknut and Shank Lock nut that holds the Flushmate system in the toilet tank. The ST100101 Wrench is designed to work with Flushmate cartridges for 1.6GPF and 1.0 GPF Flushmate models including Series 501A, 501B, 503, and 504 and remove the discharge and shank locknut from two piece toilet fixtures.

The Flushmate Flush Valve Cartridge is located on top the Flushmate system in the center of the vessel. This is the main valve that opens and closes to deliver the water to the toilet bowl. The ST100101 Wrench can be used to remove or adjust the cartridge.

The Flushmate Discharge Locknut is located on the bottom of the toilet tank. This locknut secures the Flushmate system in the toilet tank. The ST100101 Wrench can be used to remove the discharge locknut.

The Flushmate Shank Locknut is located on the bottom of the toilet tank and is where the water supply line is connected to the toilet. This locknut secures the Flushmate system in the toilet tank. The ST100101 Wrench can be used to remove the shank locknut.

ST100101 Flushmate Wrench Included:

The ST100101 Flushmate Wrench, includes

(1) ST100101 Flushmate Wrench

Manufacturer Information

Eflushmate.com only sells Flushmate factory replacement products produced by Flushmate.

The Flushmate ST100101 Wrench includes a 1 year limited warranty.

Customer Ratings & Reviews

10
Ratings Snapshot
4.9
out of 5
5 (9)
4 (1)
3 (0)
2 (0)
1 (0)
Would recommend this product.
0%
4.9
out of 5
5 (9)
4 (1)
3 (0)
2 (0)
1 (0)
Would recommend this product.
0%
10 Total Reviews
Nice inexpensive tool
5 out of 5
Dwight L Sooter
Location: KY
Date: January 1, 1970
Nice tool for a tank change out. Almost everything you need to change out the pressure tank. If I ever need to do that again I'll have the tool already.
Flushmate wrench
4 out of 5
Bryan Rozendaal
Location: Iowa
Date: January 1, 1970
Purchased the wrench to replace cartridge. Old cartridge was very tight; I had to use a crescent wrench to assist in removal. After a couple of attempts, one of the times broke. I had to use a pair of pliers to finally get the cartridge out. Replacing the new cartridge was a breeze, and the toilet is working as good as new! The tool would be extremely helpful if were made of something much stronger; and I personally would be willing to pay extra just to have it. Otherwise, very satisfied with service and experience.
Flushmate tool
5 out of 5
Jim Ford
Location: Texas
Date: January 1, 1970
This tool works very well.
Flushmate Wrench
5 out of 5
Robert Chase
Location: Connecticut
Date: January 1, 1970
This was easy to order online from Flushmate and arrived quickly.
Handy tool, good service
5 out of 5
Robert Chase
Location: Connecticut
Date: January 1, 1970
The Flushmate Wrench was easy to order online and arrived quickly. It is handy for attaching the Flushmate or any other toilet tower to the tank in the event that you do not have a huge pipe wrench.
Flushmate wrench
5 out of 5
Larry Uno
Location: NJ
Date: January 1, 1970
Purchased wrench to help with remove and reinstall of 503 replacement tank kit. Inexpensive, sturdy, helpful. Works as advertised. Only comment when removing the large nut securing the unit to the tank. The wrench has 4 small raised nubs that prevented a secure fit on the nut to loosen. After a couple of attempts I stopped so I wouldn’t round the corners of the nut and make removal more difficult, I ground them off with my Dremel tool in 2 minutes and it then fit fully on the nut and was then able to remove and replace the 503 tank kit. Nice helpful product for a fair price.
Wrench and flushmate 3
5 out of 5
From Indiana
Location:
Date: January 1, 1970
it came early and wrench helps to release from the main component. Thank you\r\nGod bless
Cartridge wrench
5 out of 5
Keith
Location: Michigan
Date: January 1, 1970
OK design but pretty flimsy. It flexed a lot while I was removing cartridge. Had to use plier handles to remove cartridge. Put petroleum jelly on the threads when installing new cartridge and the wrench worked fine.
Wrench
5 out of 5
Janet P
Location: California
Date: January 1, 1970
You have get this wrench! I needed to replace the tank, but wanted to make sure that I could remove the original one. Channel locks couldn't do it, so I had to use a LARGE pipe wrench. This tool made it a breeze to install. I highly recommend this wrench!
Flushmate Wrench Does the Trick
5 out of 5
Rick
Location: CA
Date: January 1, 1970
This was the first time changing out one of these Flushmate power flushers, and this tool made it easy. We have several of these on campus, so now that I have the wrench, I have no worries about future replacements. This wrench made it so easy.
10 Total Reviews